车床转盘工艺夹具的设计（有全套图纸）.doc

全套CAD图纸,联系qq 695132052 摘 要 本文主要介绍了车床转盘工艺夹具的设计,全文共分为工艺部分和工装部分这两大部分来阐述所设计的车床转盘的设计方法和工作原理。 工艺部分主要是对零件的材料性能、形状及尺寸和工艺性的分析,从而确定毛坯类型和制造方法,按照所确定的毛坯尺寸和公差来确定机械加工工艺规程。在工艺设计过程中,最大的难点是定位基准的选择和机械加工工艺路线的确定。通过确定机械加工工序余量、工序尺寸及表面粗糙度来选择机械加工设备及工艺装备。 工装部分主要介绍了车床转盘专用夹具的设计,在确定夹具总体设计方案时,车床转盘专用夹具能否完成好工件的定位和夹紧达到所要求的技术要求显得尤为重要。在确定定位方案、定位原件、夹紧方案、夹紧原件的时候,应综合考虑相关的影响因素和原则,从而完善夹具的设计。其中在确定夹紧力大小的时候,应首先考虑夹紧力的方向和作用点。应保证夹具夹紧力和轴向力方向一致,为防止工件在加工过程中产生振动和转动,采用夹具夹紧工件,以防止工件转动,在设计过程中应当考虑到侧壁的定位和刚性能否达到技术要,并采用适当的方式来解决这个问题。 关键词:工艺,夹具,定位,毛坯 全套图纸,联系QQ695132052 Abstract This paper mainly introduces the design of turning wheel technics and frock. The whole text is divided into technics part and frock part, which is to expound the design methods and working principle of the designed turning wheel Technics part mainly analyzes on the material properties, shape, size and technical capability. And then make sure the roughcast types and manufacturing methods, in accordance with the defined dimensions and tolerances to determine a point of order for machining process. In the process of technics design, the biggest difficulty are the selection for orientation benchmark and the confirmation on the route of processing technics. By confirming the margin and size of working procedure and surface roughness, people select mechanical processing facility and technics equipment Frock part mainly introduces the design of special clamp for turning wheel. In the process of confirming the rough design scheme of clamp, it is particularly important whether the special clamp can achive good positioning and clamping the workpiece to the required technical requirements. When determining the orientation program, positioning material, clamping program and clamping material, people should consider the impact of relevant factors and principles, consequently improving the design of clamp. In the process of determining the clamping force, people should consider the direction of clamping force and the acting point f