数控系统--外文翻译模板.docVIP

大连交通大学信息工程学院 毕业设计(论文)外文翻译 学生姓名 陈辉 　 专业班级 机械073班　 指导教师 王凤彪 　职 称　 讲师 　　 所在单位 机械工程系 教学部主任 　 吕海霆 完成日期 2011年4月15日Numerical Control System The numerical control system is the digital control system abbreviation. By early is composed of hardware circuit is called hardware numerical control (Hard NC), after 1970, hardware circuit components gradually instead by the computer called for computer numerical control system. Computerized numerical control system is a system that is use computer control processing function to achieve numerical control system. CNC system according to the computer memory stored in the control program execution part or all, numerical control function, and is equipped with interface circuit and servo drive the special computer system. CNC system consists of NC program, input devices; output devices, computer numerical control equipment (CNC equipment), programmable logic controllers (PLC), the spindle and feed drive (servo) drive (including detection devices) and so on. The core of CNC system is equipment. By using the computer system with the function of software and PLC instead of the traditional machine electric device to make the system logic control more compact, its flexibility and versatility, reliability become more better, easy to implement complex numerical control function, use and maintenance can be more convenient, and it also has connected and super ordination machine and the remote communication function. At present, the numerical control system has variety of different forms; composition structure has its own characteristics. These structural features from the basic requirements of the initial system design and engineering design ideas. For example, the control system of point and continuous path control systems have different requirements. For the T system and the M system, there are also very different, the former applies to r