- 1、本文档共41页,可阅读全部内容。
- 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
- 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
买文档后送图纸,QQ194535455
买文档后送图纸,QQ 194535455
齿轮测量中基座及径向滑架系统设计
Gear measurement base and radial car-riage system design
摘 要
齿轮测量仪器种类很多,可分为基本几何参数误差测量仪器、综合参数误差测量仪器和整体误差测量仪器。基本几何参数误差测量仪器、能完成被测齿轮的齿形(渐近线)、齿向(螺旋线)、周节和齿厚等四项基本几何参数的测量。
双面啮合测量是一种大体模拟齿轮实际加工情况的测量方法,即所有误差综合地在径向上以中心距的变动量来起作用,所以能比较真实地反映齿轮实际加工中、齿轮与刀具的相对位置误差,这对工艺参数的调整提供了方便。这种检验方法具有检验效率高的优点,但其不足之点在于从齿轮综合参数误差的测量结果中,要分析出周节、齿形等基本几何参数误差是困难的。
本设计主要针对从测量结果中做出对基本几何参数误差的分析,来设计基座及径向滑架,不仅能真实地反映齿轮实际加工中,齿轮与刀具的相对位置误差,也能分析出周节、齿形等基本参数误差。
关键词:万能齿轮测量仪 径向滑架 基座 误差
Abstract Many types of gear measuring instruments can be divided into basic geometric parameters of error of measuring equipment, integrated parameters of error of measuring instruments and the overall error of measuring instruments. Basic geometric parameters of error of measuring instruments, to complete the measured gear tooth (Asymptote), to the teeth (spiral), thick-section and teeth, such as the four basic geometric parameters measured. Measurement is a two-sided meshing gears roughly simulate the actual processing of the measurement method, that is, all integrated in the radial error on the distance to play a role in the movement, the technical parameters of the adjustment of the convenience. This test method has the advantage of high-efficiency test, but the point is that lack of comprehensive parameters of error of gear from the measurement results, it is necessary to analyze week festival, the basic geometric parameters profile error is difficult. The design mainly from the measurements made in the basic parameters of the geometric error of analysis, to design the base and radial sliding planes, not only can truly reflect the actual processing gear, the gear and the relative position of error tool can also analyze Week Festival, tooth, and other basic parameters error.
Key words: Universal gear measuring instrument radial sliding planes the base error
目录
绪论……………………’
/…………………………………………….2
1.1 万能齿轮测量仪的发展现状……………………………………….2
1.2 论文研究的目的及意义…………………………………………...4
第二章 万能式齿轮测量机…
您可能关注的文档
- 侧弯支架冷冲压工艺及级进模设计论文(含CAD图纸全套).doc
- 侧卸式铲斗装载机总体设计和工作机构设计(含CAD图纸全套).doc
- 侧支架钻孔组合机床总体设计(含CAD图纸全套).doc
- 侧装式少齿差传动卷扬机设计(含CAD图纸全套).doc
- 叉车驱动桥设计(含CAD图纸全套).doc
- 叉杆零件工艺设计与工装设计(含CAD图纸全套).doc
- 叉形凸缘双面铣床及夹具毕业设计(含CAD图纸全套).doc
- 叉形凸缘双面铣床及夹具设计(含CAD图纸全套).doc
- 插入耳环工艺夹具设计(含CAD图纸全套).doc
- 插入耳环机械加工工艺课程设计工艺规程工序卡片(含CAD图纸全套).doc
- 《GB/T 17737.9-2024同轴通信电缆 第9部分:柔软射频同轴电缆分规范》.pdf
- GB/T 17737.9-2024同轴通信电缆 第9部分:柔软射频同轴电缆分规范.pdf
- 中国国家标准 GB/T 17737.9-2024同轴通信电缆 第9部分:柔软射频同轴电缆分规范.pdf
- GB/T 44003-2024力学性能测量 REBCO涂层导体(镀铜)脱层强度测试方法.pdf
- 中国国家标准 GB/T 44021.2-2024音视频及相关设备 功耗测量 第2部分:测试信号和媒介.pdf
- 《GB/T 44021.2-2024音视频及相关设备 功耗测量 第2部分:测试信号和媒介》.pdf
- GB/T 44021.2-2024音视频及相关设备 功耗测量 第2部分:测试信号和媒介.pdf
- GB/T 43962.1-2024动力电池数字化车间集成 第1部分:通用要求.pdf
- 2024广西南宁市江南区教育局面向南宁市公办学校招募中学支教志愿者88人笔试备考试题及答案解析.docx
- 2024广西合浦县山口镇人民政府公开招聘村级防贫监测信息员2人笔试备考试题及答案解析.docx
文档评论(0)