《IEEE24__RTS___标准数据和网络接线图》.pdf

IEEE Transactions on Power Apparatus and Systems, Vol. PAS-98, No.6 Nov./Dec. 1979 2047 IEEE RELIABILITY TEST SYSTEM A report prepared by the Reliability Test System Task Force of the Application of Probability Methods Subcommittee* ABSTRACT - Distribution system configuration Interconnections with other systems This report describes a load model, generation - Protective relay configurations system, and transmission network which can be used to - Future expansion, such as load growth, test or compare methods for reliability analysis of future unit sizes, types, and reliability. power systems. The objective is to define a system sufficiently broad to provide a basis for reporting on The Electric Power Research Institute (EPRI) has analysis methods for combined generation/transmission recently reported data on synthetic electric utility (composite) reliability. systems [1]. These contain much larger systems than the one in this report. They are designed primarily The load model gives hourly loads for one year on for use in evaluation of alternate technologies. a per unit basis, expressed in chronological fashion so that daily, weekly, and seasonal patterns can be A smaller test system was developed by the CIGRE modeled. The generating system contains 32 units, Working group 01 of Study Committee No. 32