转向几何参数的讨论汽车课程毕业设计外文文献翻译.docVIP

英文资料翻译 Introduction This chapter begins with a discussion of steering geometry-caster angle,trail, kingpin inclination, and scrub radius. The next section discusses Ackemann geometry followed by steering racks and gears. Ride steer（bump steer）and roll steer are closely related to each other, without compliance they would be the same.Finally,wheel alignment is discussed. This chapter is tied to Chapter 17 on Suspension Geometry-when designing a new chassis, steering and suspension geometry considerations are high priorities. 19.1Steering Geometry The kingpin in a solid front axle is the steerin