CP.3 图像处理 西安理工大学.ppt

Cp.6 Traditional Image Assemble and Platemaking Terms Stripping 手工拼版（make-up拼版) Proof 打样 Imposition 组版/拼版 Work and Turn Imposition 侧翻版 Work and Tumble Imposition 滚翻版 Registration 套准 Platemaking 制版 Offset,Lithography 胶印 Section 1:Traditional Image Assemble The combination of text and images to form a page occurs during the page “make-up”. In the production of conventional printing plates the complete page is put together manually by repro experts from text and images that exist mainly as cut films. The films are placed on a carrier sheet, adjusted for position, and fastened in place. The quality of the print depends directly on the precision and care of the makeup. Film stripping is carried out on a light table (see also fig.). Its work surface consists of a glass plate that is illuminated from below with diffuse white light. Stripping Transparent Materials The Purpose of Stripping: Mechanical stripping is the process of assembling all pieces of film containing images that will be carried on the same printing plate and securing them on a masking sheet that will hold them in their appropriate printing positions during the platemaking process. The assembled masking sheet with pieces of film attached is called flat. The flat is generally tested on some inexpensive photosensitive material to check image positions and to ensure that no undesired light reaches the plate.This process is called proof. Imposition Imposition refers to placing images in the correct positions on the printing plate so they print in the desired locations on the final printed sheet. The design of the printed piece The type and size of the press The type of paper Type of Imposition One-side imposition Sheet-wise Imposition Ganged Imposition P110.Fig Signature Imposition P110.Fig Work and Turn Imposition P111.Fig Work and Tumble Imposition P111.Fig Elementary Stripping Techniques Masking Sheets P113.Fig6.6 The cylinder line The gripper margin The point where the i