西安筑路机械厂办公设计稿计算书.docVIP

毕 业 设 计（论 文） 西安筑路机械厂办公设计 系　　　　　　别： 建筑与土木工程学院 专业名称： 土木工程 学生姓名： 学　　　　　　号： 指导教师姓名、职称： 孙立新 完成日期 2015 年 4 月 3 日 摘要 本设计包括建筑设计和结构设计两大部分。建筑设计主要是确定建筑方案，包括平面、立面和剖面的设计；结构设计主要分为结构方案布置、荷载计算、内力计算、内力组合、截面设计、板设计、楼梯设计和基础设计。设计过程采用手算完成，最后上机进行校核。 由于缺乏实际工程经验，设计过程中，对于平、立、剖建筑设计还存在一些问题；结构计算综合运用能力欠缺，设计时间紧张，设计中错误难免，敬请各位老师批评指正，谢谢！ Abstract The topic of this graduation design?is the?design of the office building of?Xi'an?road construction machinery factory.?Considering the building?location,?building?use function and the?performance of building structures,?the reinforced concrete frame structure?with?building.The northwest?area?of seismic fortification?is eight degrees,?the structure?scheme selectionshould be considered when?the seismic requirements.?Considering the?security?structure,?the best?structure of?the?rules;?at the same time to consider the?use of functional requirementsand?conform to the?characteristics of?buildings,?office buildings in the?building facade?effect.Considering the?selection of?construction?scheme,?the design?and?structure of the program. The design includes?architectural design and structural design?of two parts.?The architectural design?is to determine the?construction?scheme,?the design?includes the plane,?elevation andprofile?design;?the structure?is the structure layout,?load calculation,?internal force calculation,internal force combination,?cross section design,?board design,?staircase design?and foundation design.?The design process?is?completed?by hand,?and finally?on the?check. Due to the lack of?practical engineering experience,?the design process,?the?flat,?verticalsection,?there are still some problems in?architectural design;?structure calculation?using?the lack of capacity,?the design?time,?design?is?in?error,?please?the teacher criticism,?thank you.目 录 1 引言 1 2 建筑设计说明 2 2.1 平面设计 2 2.2 建筑剖面设计 2 2.3 建筑体型和立面设计 2 3 结构设计说明 4 3.1 工程概况 4 3.2 设计资料 4 3.3 结构设计方案及布置 4 3.4 构件初估 5 3.5 荷载计算 6 3.6 侧移计算及控制 6 3.7 内力计算及组合 6 3.8 施