5.2.1 Rigid Flange Coupling IDCOnline（5.2.1 IDCOnline刚性法兰耦合）.pdfVIP

Instructional Objectives At the end of this lesson, the students should have the knowledge of • Detailed design procedure of a typical rigid flange coupling. • Detailed design procedure of a typical flexible rubber-bush coupling. 5.2.1 Rigid Flange Coupling A typical rigid flange coupling is shown in Figure- 5.1.2.1.4.2. If essentially consists of two cast iron flanges which are keyed to the shafts to be joined. The flanges are brought together and are bolted in the annular space between the hub and the protecting flange. The prote