预应力预制双T板的总设计说明书.docVIP

设计总说明 叠合板和双T板广泛应用于桥梁，近年来在国内迅速的普及，合理地设计采用预制构件的装配式结构，在工期、施工环境、质量、成本等方面有很多优越性。本设计为年产1万片叠合板和3万片预应力混凝土双T板制品厂及配套设施设计。本文通过对叠合板和双T板的配合比计算，确定了混凝土制品构件厂的原材料，合理地选取了混凝土搅拌机、皮带输送机、钢筋墩头机等设备。根据设计原始资料及参数、设计原则、产品品种（叠合板、预应力混凝土双T板）工厂规模和生产方法、生产工艺的特点，确定出生产的工艺流程和各生产车间的工作制度。本文还对厂区主要设备进行了选型设计，原料仓库，成品仓库的计算，最后根据设计依据、设计原则以及工艺要求，进行了车间工艺的布置，使其达到合理性。 关键词：预应力混凝土，叠合板，双T板，工艺设计 General description of the design Composite plate and double T plate is widely used in bridge, in recent years in the domestic rapid popularization, the design adopts prefabricated prefabricated structure reasonably, in the construction period, construction environment, quality, cost, etc. There are a lot of advantages. This design for the annual output of 10000 pieces of composite plate and 30000 pieces of prestressed concrete double T plate production factory and facilities design. This article through to the composite plate and double T plate mixture ratio calculation, determine the raw materials of concrete products file, selecting reasonably the concrete mixer, equipment such as belt conveyor, steel pier head machine. According to the original design data and parameters, design principles, product varieties (prestressed concrete composite plate, double T plate) factory scale and production methods, production technology, the characteristics of the technological process of production and the system of each production workshop work. This article also on the factory main equipment selection design, raw material warehouse and finished products warehouse, according to the design basis, design principle and technical requirements, the layout of workshop process, to the rationality. Key words: prestressed concrete , laminate plates , Double-T plates, process design目录 第1章 绪论 1 1.1预应力混凝土技术发展史 1 1.2预应力预制双T板发展 1 1.2.1预应力预制双T板的发展现状 1 1.2.2 预应力叠合板的应用与发展现状 2 1.3 产品的方案 3 3 1.3.2 建厂地址的地质条件及各种情况 3 1.3.3 工厂的组成 4 第2章混凝土配合比的计算 5 5 2.2普通混凝土配合比计算 5 2.2.1确定配置强度 5 2.2.2确定水灰比 6 2.2.3确定1立方米混凝土用水量 6 2.2.4确定1立方米凝胶材料用量 6 2.2.5选择合适的砂率值 8 2.