基于DSP Builder的FIR数字滤波器的仿真设计.docVIP

数字信号处理课程设计 题 目：基于DSP Builder的FIR数字滤波器的仿真设计 姓 名： 专 业：电子信息工程 班 级： 08级3班 院 系：信息科学与工程学院 入学年度：2008年 指导教师: 日 期: 2011年3月13日 基于DSP Builder的FIR数字滤波器的仿真设计 摘要：数字滤波器是数字信号处理中的核心环节，而FIR数字滤波器因其具有严格的线性相位，系统总是稳定等特点而广泛应用于数字信号处理的各个领域，因此是一个重要的研究课题。随着微电子技术的发展，数字信号处理得到了飞速发展数字滤波器是谱分析、雷达信号处理、通信信号处理应用中的基本处理算法数字音频、图像处理、数据传输、生物医学等领域得到广泛应用。基于M/Simulink的DSP设计技术、详细的向导、本文通过一个设计实例，提出了一种采用DSP Builder实现有限冲激响应滤波器的设计方案并以一个数字滤波器的实现为例设计并完成软件仿真与验证MATLAB；数字滤波器仿真The Design Of The FIR Digital Filter Based On DSP Builder Abstract: Digital filter algorithm is one of the core techniques in signal processing. The FIR digital filter has been widely used in signal processing field because of its strict linear phase and stability. With the development of microelectronics technology, digital signal processing has made rapid development. Digital filter is the basic processing algorithms in respect of spectral analysis, radar signal processing and communications signal processing applications, and receive widely application at the field of digital audio, Image processing, data transmission and biomedical etc. This content includes FIR digital filter network structure, linear-phase conditions, characteristics, design methods, DSP design technology of MATLAB-based, detailed design flow guide and ModelSim simulation and so on. This paper posed a design example through using the DSP Builder realize Finite Impulse Response Filter and complete hardware design simulation and verification as an example by the realization of 24-step low-pass digital FIR filter. Through simulation and verification, the system of the digital filter designed can run successfully, and the designed filter has good stability, high accuracy, less susceptible to environmental impacts. In the use of FPGA for the development of digital filters using Matlab-based environment as a design tool for DSP Builder can be more convenient to create models, and to complete the whole design. Key words: MATLAB; Digital filter; DSP Builder