STM32_波形采集、存储与回放.doc

  1. 1、本文档共25页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
波形采集、存储与回放系统设计 摘 要 本设计是基于数字示波器的原理,以STM32-cortex-m3作为控制芯片,把波形采集分为A、B两个通道,对A通道的输入信号进行衰减,对B通道的输入信号进行放大,然后采用内部集成的高速AD对信号进行实时采样,方式为上升沿内触发,可以实现波形的单次和多次触发存储和回放显示,以及频率、周期、峰-峰值的测量和显示,并具有掉电存储功能。由信号采集、数据处理、波形显示,控制面板等功能模块组成,整个系统分成A/D转换部分、D/A转换部分、波形存储部分、键盘输入控制四大部分,系统操作简便,输出波形可以在示波器输出显示,此存储示波器即具有一般示波器实时采样实时显示的功能,又可以对某段波形进行即时存储和连续回放显示,且界面友好,达到了较好的性能指标。具体设计原理以及过程在下面章节中详细说明。 关键字:STM32、波形采集、波形存储、波形回放 Abstract The design is based on the principle of digital oscilloscope, with STM32-cortex-m3 as the control chip, the waveform acquisition is divided into A, B two channel, the A channel input signal attenuation on B channel, the input signal is amplified, then using the internal integration of high-speed AD on real time data sampling, as rising edge trigger, can achieve waveform of single and multiple triggers the storage and playback and display, frequency, cycle, peak to peak value measurement and display, and power failure memory function. The signal acquisition, data processing, waveform display, the control panel and other functional modules, the system is divided into A/D transformation, D/A converting part, waveform storage, keyboard input control system four parts, simple operation, the output waveform can be output in the oscilloscope display, this storage oscilloscope namely has the common oscilloscope real-time sampling real time display function, can be a real-time storage and continuous playback waveform display, and friendly interface, has achieved good performance. The design principle and process are described in detail in the following sections. Keywords: STM32, waveform acquisition, storage, waveform waveform playback 模拟路灯控制系统设计 目 录 一、总体方案思路及其设计 4 1.1、采样方式 4 1.2、双踪示波器显示方式 5 1.3、控制部分方案的设计 5 1.4、显示方式 5 二 、系统理论分析与功能模块设计 5 2.1 、最小系统及A/D,D/A电路 5 2. 2、 单元电路 6 三、软件设计 10 3.1、软件流程 10 3.2:软件子程序 11 四、测试方案与测试结果 12 五、结束语 14 附件1:系统程序 14 一、总体方案思路及其设计 1、根据题目要求进行相关指标分析 根据题目要求A通道只是对单极性(高电平为4V,低电平为0V,频率为1KHZ)的信号进行采集、存储和连续回放;B通道需要对双极性(电压峰峰值为 100mV、频率为 10Hz~10kHz)的信号进行处理。 对信号的采集要通

文档评论(0)

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档