AT切割石英晶体板面剪切振动模态特性研究.pdfVIP

FACE-SHEAR VIBRATION OF AT-CUT QUARTZ PLATE 1 2 2 1 Qiaoqiao PAN , Ji WANG , Lijun YANG , Min-Chiang CHAO 1 TXC (Ningbo) Corporation, 189 Huangshan West Rd, Beilun District, Ningbo, Zhejiang 315800, China 2 Piezoelectric Device Lab, School of Mech Eng Mechanics, Ningbo University, 818 Fenghua Rd, Ningbo, Zhejiang 315211, China E-mail: {nqiaoqiaopan, chaomk}@.tw wangji@ Based on Mindlin plate theory, the frequency spectrum of face shear mode in AT-cut quartz plates and its frequency temperature behavior are studied. The results of numerical simulation are compared with experiment data. Both exact three-dimensional plate equations and Mindlin first-order plate equations are used to calculate the spectrum respectively, which can help engineers to decide suitable dimensions of AT-cut quartz plate to avoid the couple of thickness-shear and face-shear. The temperature behavior characteristic is quite an important characteristic of quartz resonator. In the present paper, the frequency temperature behavior of face-shear mode is also studied. Linking the frequency spectrum and temperature behavior results can enable engineers not only to get suitable dimensions of AT- cut quartz plate at room temperature but also to get suitable dimensions at certain temperature range. The measurement data for rectangular, AT-cut quartz plates is also demonstrated. Keywords: face-shear, first-order plate equation, frequency temperature behavior AT 切割石英晶体板面剪切振动模态特性研究 潘俏俏 1 王骥 2 阳丽君2 赵岷江 1 1315800 浙江省宁波市北仑区黄山西路189号台晶(宁波) 电子有限公司 2315211 浙江省宁波市江北区风华路 818 号宁波大学机械工程与力学学院压电器件技术实验室 电子邮件：{nqiaoqiaopan, chaomk}@.tw wangji@ 基于 Mindlin 板的理论，得到 AT 切割石英晶体板面剪切振动的频谱图，以及面剪切振动的频率温度特性结果，