过滤器的设计及运动仿真说明书.docVIP

摘 要 过滤分离技术在国民经济各个部门中应用很广。从人民日常生活，资源、能源的开发利用，国防尖端，到保护环境，防止公害等方面，都离不开过滤分离技术。过滤器和过滤分离技术不仅应用广，而且是某些生产过程中的关键性设备之一，若采用不当，不但生产任务完不成，产品质量上不去，而且会造成资源浪费，环境污染，使整个生产经济效益很低。因此，必须根据物料的种类及生产上的要求，研究、设计和制造各种不同系列、规格和型号的过滤器，以适应各种不同生产的需要。 本设计选择复合型袋式精细过滤器作为设计对象。在全面了解过滤器的结构及其工作原理后，运用SW6-1998过程设备强度计算软件，对受压的圆筒、封头和法兰等受压元件进行强度计算。利用UG软件对过滤器的零件进行参数化建模，并对整体结构进行虚拟装配。然后将装配体导入UG软件的运动仿真界面，并利用软件进行运动学仿真。分析仿真结果，得出相应结论。最后对过滤器进行优化设计，提高其稳定性，可靠性，让本设计能够真正的投入到日常生产操作中，使其切实能够为过滤分离技术做出贡献。 关键词：UG；过滤器；运动仿真 Abstract Filtering separation technology is applied widely in various departments of national economy. From the aspect of people’s daily life, such as the exploitation and utilization of resources and energy and the advanced national defense to the aspect of protecting environment and preventing pollution and other aspects, all of them cannot be without filtration-separation technology . Filter and filtering-separation technology are not only used widely but also are one of the key equipments in some production processes. If the technology is used unsuitably, the production task will not be finished and the quality of the products will not be improved. Even it will cause the the waste of resources and environmental pollution so that it will reduce the production efficiency.Therefore, in order to meet the demands of different production, we should research, design and manufacture the various series, specifications and types of filters according to the kinds of production materials and the requirements of production. This design chooses fine the composite bag type filter as the design object. After comprehensive understanding of the structure and working principles of the filter, this design uses SW6-1998 process equipment calculation software for calculating the strength of the pressurized cylinder, head, and flange pressure parts and other pressurized parts. This design has a parametric modeling of the elements of filter by using UG software and assemble the integral structure virtually. Then