轻型落地式回转双平臂钢抱杆的特殊环境组塔施工应用.pdf

第31 卷 第8 期 电 力 建 设 Vol.31，No.8 ·32 · 2010 年8 月 Electric Power Construction Aug ，2010 中图分类号：TM 754 文献标志码：B 文章编号：1000-7229 （2010 ）08-0032-06 轻型落地式回转双平臂钢抱杆的 特殊环境组塔施工应用 吴昊亭 （北京电力工程公司，北京市，100161） ApplicationofLightConsole-typeDouble-level RotatingSteelLiftingPole inTowerErectionunderSpecial Circumstances WUHao-ting （BeijingPowerEngineeringCompany,Beijing100161,China） ABSTRACT ：A light console-type double-level rotating steel 内悬浮内（外）拉线（摇臂）抱杆分解组塔和落地摇 lifting pole was developed for tower erection under the special [1-11] （平）臂抱杆分解组塔等工艺 ，已不能适应上述特 circumstance of the Zhejiang section of Xiangjiaba-Shanghai 殊环境铁塔的组立施工。鉴于上述情况，北京电力工 ± 800 kV UHVDC transmission project, where the transmission 程公司针对特殊地形环境下的特高压输电线路铁塔 corridor is narrow and the terrain condition is very poor, making 组立，研制了2×50 kN □1000轻型落地式回转双平臂 it difficult to erect the towers. This construction technology is 钢抱杆（简称新研制抱杆）。 proved to be applicable to erection of angle-steel towers and steel-pipe towers of the UHV transmission lines, the towers in 1 新研制抱杆简介 mountainous and hilly areas where guy installation is difficult, or the towers which are close to the live lines and guys cannot be 新研制的抱杆包括8 大系统：塔顶（桅杆）总成； installed. 吊臂、拉杆、载重小车和吊钩组件；回转塔身、上下支 KEYWORDS ：UHVDC ；light console-type double-level lifting 座总成；杆身；腰环及抱箍；顶升套架；底架基础和基 pole ；overhead transmission line ；angle-steel tower ；steel-pipe 础底板；电控系统。 tower ；special circumstances ；tower assembling and erection 抱杆杆身截面为□