用标准的分析步骤分析普通形式的CAUER滤波器英文资料翻译.docVIP

英文资料原文 Exact Determination of the Natural Modes of Some Cauer Filters by Means of a Standard Analytical Procedure 1. instructions The excellent filtering properties of cauer filters are known[1.2].However a prerequisite for the Design of such filters is the knowledge of the jacobian elliptic functions and the Legendre elliptic integral. Unfortunately, these functions are unfamiliar to most engineers and therefore reluctantly used. The aim of this article is to present a standard analytical procedure for the design of transfer functions poles of some elliptic filters. Denoting the nth-order output-to-input transfer function as ,the squared magnitude Function is H（S）H（-S）/S=jw = （1） Where is the ripple factor , while denotes the elliptic characteristic function with -1 1, -1w1 （2 And =； Where is the stopband edge frequency normalized to the unity passband. Transfer function poles presented in eqn.3 are somewhat modified form of the eqns.6.22-6.26 in [1]. （Where are the attenuation zeros while is the elliptic sine function. However ,to avoid The use of the Jacobian elliptic functions we shall apply a particular analytical procedure to determine =（，k） （）Where is the function of the argument and the selectivity parameter k=. In order to determine,we shall make use of the same function .Parameter , usually called the discrimination factor , is reciprocal of the nth-order characteristic function at the stopband edge frequency [3.4]. The function is precisely determined by the assigned ripple factor given in eqn.6.13in [1] = （5） Thanks to this fact and the known relation between and for n=2 and 3[3], it is possible to eliminate eqns.4 and 5 by a standard analytical procedure, without resorting to the jacobian elliptic functions and integral. The newly formed function, depending on ,k and only, will be designated as