外壳零件的注射模设计（含全套CAD图纸）.doc

买文档后送图纸，QQ 194535455 毕业设计说明书（论文）中文摘要 本论文根据工程实际的需要完成外壳的注射模具设计。在设计中采用ABS塑料注射而成型，成型方式为一模两腔，该论文具体分析了产品的工艺性，确定了所采用塑料的工艺参数和所采用的成型设备，确定了模具制作的总体方案，分析并解决了模具的总体结构和各工作部分的具体结构，并进行了一些必要的尺寸计算和强度的校核。该论文还对分型面、浇注系统和脱模机构进行了分析设计，完成了模具工程图设计，最后进行了主要零件加工工艺设计。 关键词 注射模 成型 工艺性 设计 毕业设计说明书（论文）外文摘要 Title The Injection Mold with Crstaceous part Design Abstract The present paper actual needs to complete according to the project the injection mold with crstaceous part design. Uses the ABS plastic injection in the design to take shape，the formation way is a mold two cavity, this paper concrete study products technology capability, had determined uses the formation equipment which the plastic the technological parameter and uses, had determined the mold manufactures the overall concept, analyzed and has solved molds gross structure and each effective range concrete structure, and has carried on some essential size computation and the intensity examination. This paper also halved the profile, the gating system and the mold emptier has carried on the analysis design, has completed the mold engineering plat design, finally has carried on the major parts processing technological design, has completed each work. Through the design, the synthesis has applied the university period most foundations and the specialized knowledge, deepens studies the knowledge system, has been familiar with the project application design. Keywords injects the mold formation technology capability design 目 录 1 引言…………………………………………………………………………………………… 1 1．1塑料模具的发展现状……………………………………………………………… 1 1．2国内外的研究现状分析…………………………………………………………… 1 1．3PRO/ENGINEER在模具中的应用………………………………………………… 2 2 模具结构形式 ………………………………………………………………… 5 2.1 确定型腔数量及排列方式……………………………………………………… 5 2.2 模具结构形式的确定…………………………………………………………… 5 2.3 材料性能分析 ………………………………………………………………… 5 2.4 注射机型号的确定……………………………………………………………… 6 3 壳体模具的设计…………………………………………………………………… 7 3.1分型面位置的确定………………………………………………………………… 7 3.2浇注系统的形式和浇口的设计…………………………………………………… 7 3．3冷料穴的设计…………………………………………………