Lights (virtools BB模块汉语翻译及用法详解).docVIP

2 Lights Lens Flare BB Description Apply to a LIGHT.Simulates a lens flare by rendering a Light with a specific Texture. Lens Flare.cmo Technical Information On: activates the process.Off: deactivates the process.Exit On: activates when the process is activated.Exit Off: activates when the process is deactivated.Flare Array: Array containing flares, glares and glow values (see below).Flare Texture: Texture containing one or several flares, glares or glow elements.Size Scale: allows you to change the size of all flares at once by the same factor.Read Array Each Frame: if selected, Lens Flare reads Flare Array at each frame. This adds to processing time, and is only useful if the Flare Array changes dynamically between frames. Remarks Flare Array must have the following format - note that the order of the columns is important, the names are not:0. Texture Region (Parameter Rectangle): rectangle 灯光 镜头眩光行为交互模式 描述 应用于灯光，通过特效材质渲染灯光模拟镜头喧光 Lens Flare.cmo 技术上的信息 On: 激活事件Off: 取消事件 Exit On: 当事件激活时被激活 Exit Off: 当时间取消时被激活 Flare Array: 队列包含闪光，眩光和发光数值（见下文） Flare Texture: 材质包含一个或多个闪光，眩光和发光元素 Size Scale: 用一个参数改变所有闪光的大小 Read Array Each Frame: 如果选中，镜头眩光在每帧读取Flare Array。这会增加处理时间，并且只在改变帧间力时生效 评论 闪光队列必须有以下格式，输入时注意顺序，名字不重要 0. 材质区域 (矩形选区限定):矩形选取定义材质中闪光 defining the flare in the Texture. (0,0,0,0) means the entire Texture.1. Position (Float): position of the flare on the virtual line, going through the light and intersecting the center of the screen. 1 means the light, 0 means the center of the screen.2. Color (Parameter Color): color of the flare.3. Size (Parameter 2D Vector): horizontal and vertical size of the flare.4. Angular Speed (Float): rotating speed of the flare when it moves. 0 means no rotation at all.5. Fade In Time (Integer): time in ms for the flare to appear.6. Fade Out Time (Integer): time in ms for the flare to disappear.7. Visibility Angle (Parameter Angle): angle from the center of the camera in which the flare is visible. 0 means in fact 90° so