CCTV新台址主楼施工过程结构内力和变形分析_刘学武.pdfVIP

CCTV 新台址主楼施工过程结构内力和变形分析 刘学武 　郭彦林 　张庆林 　刘禄宇 (清华大学 土木工程系 　北京 　100084) 　　摘 　要 : CCTV 新台址主楼具有“塔楼倾斜”、“空间连体”及“大悬臂”的构成特点 。施工过程中“路径”效 应对建造过程中以及竣工时结构内力和变形的影响较大 ,与一次成型下的分析结果存在较大差别 ,需在结构 设计中加以考虑 。同时需采取合理的施工方法和措施 , 以保证施工过程中结构的安全性以及竣工时结构的 内力和变形满足设计要求 。为此 ,建立 CCTV 新台址主楼施工过程分析的有限元模型 ,对其进行施工全过程 跟踪模拟分析 ,给出施工过程结构的内力发展和变形变化的过程 ,供设计和施工参考 。 　　关键词 : CCTV 新台址主楼 　施工过程 　内力 　变形 ANALYSIS OF INTERNAL FORCE AND D EFORMATION FOR THE NEW CCTV HEAD QUARTERS D URING THE CONSTRUCTION PROCESS Liu Xuewu 　Guo Yanlin 　Zhang Qinglin 　Liu Luyu (Department of Civil Engineering , Tsinghua University 　Beijing 　100084) Abstract : The new CCTV headquarters consists of two towers leaning 6°off vertical in both directions , a tremendous 14 storyhigh cantilever joining two leaning towers at the top and a 9storyhigh podium at the bottom. Different construction procedures will lead to different internal force and deformation distribution during the construction process in this complex steel structure . They will be locked within the structure and have to be considered in the structural design . It is evident that there is a great difference in internal force and deformation distribution between according to design model one time loading and according to stepbystep construction process. And it is necessary to take reasonable construction procedures and measures to guarantee the internal force and deformation of the constructioncompleted structure to meet the requirement given by designers. It is presented the internal force and deformation analysis of the CCTV new headquarters during the construction process by employing nonlinear finite element method , and