一个经典的ansys热分析实例(流程序).docVIP

/PREP7 /TITLE,Steady-state thermal analysis of pipe junction /UNITS,BIN ! 英制单位；Use U. S. Customary system of units (inches) ! /SHOW, ! Specify graphics driver for interactive run ET,1,90 ! Define 20-node, 3-D thermal solid element MP,DENS,1,.285 ! Density = .285 lbf/in^3 MPTEMP,,70,200,300,400,500 ! Create temperature table MPDATA,KXX,1,,8.35/12,8.90/12,9.35/12,9.80/12,10.23/12 ! 指定与温度相对应的数据材料属性；导热系数；Define conductivity values MPDATA,C,1,,.113,.117,.119,.122,.125 ! Define specific heat values（比热） MPDATA,HF,2,,426/144,405/144,352/144,275/144,221/144 ! Define film coefficient;除144是单位问题，上面的除12也是单元问题 ! Define parameters for model generation RI1=1.3 ! Inside radius of cylindrical tank RO1=1.5 ! Outside radius Z1=2 ! Length RI2=.4 ! Inside radius of pipe RO2=.5 ! Outside pipe radius Z2=2 ! Pipe length CYLIND,RI1,RO1,,Z1,,90 ! 90 degree cylindrical volume for tank WPROTA,0,-90 ! 旋转当前工作的平面；从Y到Z旋转-90度；；Rotate working plane to pipe axis CYLIND,RI2,RO2,,Z2,-90 ! 角度选择在了第四象限；90 degree cylindrical volume for pipe WPSTYL,DEFA ! 重新安排工作平面的设置；另外WPSTYL,STAT to list the status of the working plane；；Return working plane to default setting BOPT,NUMB,OFF ! 关掉布尔操作的数字警告信息；Turn off Boolean numbering warning VOVLAP,1,2 ! 交迭体；Overlap the two cylinders /PNUM,VOLU,1 ! 体编号打开；Turn volume numbers on /VIEW,,-3,-1,1 /TYPE,,4 ! 精确面的显示；Precise hidden display /TITLE,Volumes used in building pipe/tank junction VPLOT VDELE,3,4,,1 ! 修剪一些体与体相关的体的因素都删掉；Trim off excess volumes ! Meshing 网格划分 ASEL,,LOC,Z,Z1 ! Selec