[学士]悬臂浇筑连续梁桥计算_secret.doc

悬臂浇筑连续梁桥计算 Abstract: ShenTian bridge was designed by me as a prestressed concrete continuous Bridge. The arrangement of this bridge is (48+84+48)m,and the total length is 210m.The girder of this bridge is concrete box girder,and the height of girder is variable. On the supported points,the height is 5m,and on the middle span is 2.2m. The wideth of the top slab is 13m,and the wideth of the bottom slab is 8m. The thickness of top slab is not variable,but the thickness of the bottom slab is variable. The thickness of the bottom slab is variabled by parabola. On the supported points, the thickness of the bottom slab is 0.8m,but on the middle span is 0.35m. The web slab is 0.45m.When this bridge was construction,we used the balanced of cantilever construction method. In this paper, I introduce the comparision and selection of scheme, the calculation of structure .At last,I simply introduce the construction method of this bridge. Key word: prestressed concrete continuous bridge; concrete box girder; supported points; middle span; thickness; variable ;parabola; he balanced of cantilever construction; the comparision and selection of scheme; the calculation of structure. 摘要：某大桥设计成一座预应力混凝土连续梁桥。它的桥跨布置为48米+84米+48米，大桥总长为210米。该桥的主梁采用混凝土箱梁，它的梁高是变化的。在支点处，梁高最大，为5米，跨中处最小，为2.2米。箱梁的顶板宽度为13.00米，底板宽度为8.00米。箱梁的顶板厚度不变，但是底板厚度是变化的。底板厚度按抛物线变化，在支点处，箱梁的底板厚度为0.8米，在跨中处，箱梁的底板厚度为0.35米。腹板为0.45米。在施工时，采用平衡悬臂施工方法。 本论文介绍了该桥的桥型选择，方案比选，以及结构的计算。最后，简单介绍了这座桥的施工方法。 关键词：预应力混凝土连续梁桥；混凝土箱梁；支点；跨中；厚度；变化；抛物线；平衡悬臂施工；方案比选；结构计算。 方案设计说明 第一节 技术指标及设计资料 (1)桥位纵断面图： 表1-1 桩号 地面高程（M） 设计标高（M） K1+85 52.00 52.00 K1+92.5 50.52 K1+100 47.24 K1+107.5 43.32 K1+115 41.68 K1+122.5 38.96 K1+130 39.6 K1+137.5 36.24 K1+145 32.84 K1+152.5 30.24 K1+160 29.88 K1+167.5 27.24 K1+175 27.64 K1+182.5 27.24 K1+190 26.88 K1+197.5 28.36 K1+205 28.76 K1+212.5 28.36 K1+220 29.88 K1+227.5 29.12 K1+235 31.52 K1+242.5 34 K1+250 35.56