GPS定位信息显示系统.doc

毕业设计、毕业论文 题 目 GPS 定位信息显示系统 学 院 人文信息学院 专业班级 电气工程及其自动化 指导教师 姓 名  摘 要 GPS是Global Positioning System的缩写，即全球定位系统。其目的是在全球范围内对地面和空中目标进行准确定位和监测。本文介绍使用GARMIN公司的GPS25-LVS系列OEM (Original Equipment Manufacturer)接收板及单片机实现实时时间、经纬度等综合信息显示的设计方法。GPS OEM板和LED显示模块的研究，GPS定位信息的采集与显示系统。重点介绍了利用单片机89C51对GPS OEM板的控制来实现定位数据的采集与传送，，，，GPS OEM板 LED显示 Abstract GPS is the acronym for Global Positioning System,the Global Positioning System.Its purpose is on a global scale aerial targets on the ground and accurate positioning and monitoring. The design is based on the AT89C51 microcontroller to achieve the simple GPS positioning information display system. The main control system completed accept data，show time, longitude, latitude and other conventional features.SCM and OEM board serial communication links used by the microcontroller to accept GPS information, decode it, and then through the LED display information.GPS information is displayed cycle time, longitude and latitude. This paper describes the use of GARMIN's GPS25-LVS series of OEM (Original Equipment Manufacturer) receiving board and SCM implementation the time,latitude and longitude of real-time, and other comprehensive information shows that the design method.Through studying on GPS OEM board and LED display module,the collection and display system of GPS’s information are designed.By using single chip computer 89C51,the GPS OEM board is controlled,thus the collection and transmission of the orientation data are realized.The orientation data are delivered to LED model for display. The practice proves that the time displayed by the system is very accurate,and the precision of orientation is high.The system satisfies the usage of the general application and certainly offers p ractical value. Keywords: Single-Chip Data Acquiring Orientation information 目 录 第1章 GPS简介及基本理论 1 1.1 关于GPS的概述 1 1.2 GPS的组成 3 1.3 GPS信号结构 6 第2章 方案论