首秦公司4300mm生产线超快冷系统开发的应用.pdfVIP

首秦公司 4300mm 生产线超快冷系统开发与应用 1 2 1 3 马长文 田士平 李家鼎 田 勇 （1.首钢技术研究院，北京 100041 ； 2.首秦公司，秦皇岛 066000 ； 3.东北大学，沈阳 110004 ） 摘 要 介绍了首钢首秦公司开发的 4300mm 生产线超快冷系统，该项目实现了高强度均匀化冷却技术在国内中厚 板生产领域的应用。该超快冷系统采用斜喷式冷却方式，开发了分区吹扫式冷却、多元冷却参数控制、基于辊速控 制的头尾遮蔽工艺等新技术，在钢板温度均匀性和板形控制方面取得了良好的效果。基于该系统开发了多个钢种， 以较低的微合金元素含量得到了较高的性能，实现了低成本减量化轧制。 关键词 超快冷 控轧控冷 中厚板 减量化轧制 The Development and Application of UFC System on 4300 mm Rolling Mill of Shouqin Company Ma Changwen1 Tian Shiping2 Li Jiading1 Tian Yong3 (1. Shougang Research Institute of Technology, Beijing, 100041; 2. Shouqin Company, Qinhuangdao, 066000; 3. Northeastern University, Shenyang, 110004) Abstract The UFC system developed by Shouqin Company on 4300 mm rolling mill was described. Based on this system, high intensity and uniform cooling technology was applied in the internal medium plate production. In this system, the inclined spray cooling technology was adopted. The divisional sweeping cooling, the multiple cooling parameters control and the head-tail mask based on roll speed control were developed. Then uniform temperature field and good shape of plates were approved. Several medium plate grades were developed based on this system, and good performance were gotten with low microalloy content, so the induced steel rolling was achieved. Key words UFC, TMCP, medium plate, reduced steel rolling 1 引言 为了实现中厚板产品结构调整，生产企业必须提高核心技术能力；为了节省能源打造绿色钢铁企业，低 成本减量化轧制成为轧钢领域的一个重要课题，而超快冷技术[1,2]正是一项低成本生产高品质高强度中厚板 产品的新技术。超快冷技术的特征是高强度均匀化的控制冷却，国外对该技术的研究以日本为代表，由于该 技术在开发高等级中厚