ANSI-B11.TR4-2004.pdf

B I I.TR4: 2004 ANSI Technical Report for Machine Tools - Selection of Programmable Electronic Systems (PESIPLC) for Machine Tools Registered: June 20,2004 by the American National Standards Institute, Inc. Secretariat and Standards Developing Organization: AMT- The Association For ManufacturingTechnology Technology Department 7901 Westpark Drive McLean,VA 22102 Copyright;All rights reserved No part of this document may be reproducedin any form, in an electronic retrieval system or otherwise, without priorwritten permission of the publisher. Printed in the UnitedStates of America AMERICAN NATIONAL STANDARDS / TECHNICAL REPORTS By registering this ANSI Technical Report, the ANSI Board of Standards Review confirms that the requirementsfor due process, consensus, balance and openness have been met by AMT - The Association For Manufacturing Technology (the ANSI-accredited standards developing organization). American National Standards and Technical Reports are developed through a consensus process. Consensus is established when substantial agreement has been reached by directly and materially affected interests. Substantial agreement means much more than a simple majority, but not necessarily unanimity. Consensus requires that all views and objections be considered, and that a concerted effort be made