MT200压力机机身的有限元分析及改进设计.docVIP

MT200压力机机身的有限元分析及改进设计.doc

  1. 1、本文档被系统程序自动判定探测到侵权嫌疑,本站暂时做下架处理。
  2. 2、如果您确认为侵权,可联系本站左侧在线QQ客服请求删除。我们会保证在24小时内做出处理,应急电话:400-050-0827。
  3. 3、此文档由网友上传,因疑似侵权的原因,本站不提供该文档下载,只提供部分内容试读。如果您是出版社/作者,看到后可认领文档,您也可以联系本站进行批量认领。
查看更多
MT200压力机机身的有限元分析及改进设计,有限元分析,有限元分析软件,solidworks有限元分析,有限元分析基础,proe有限元分析,catia有限元分析,ansys有限元分析实例,有限元分析及应用,ug有限元分析教程

摘要 有限元分析技术的应用,对于缩短产品开发周期,提高产品质量,降低制造成本,增强企业竞争力具有重要意义。本文以闭式压力机机身为研究对象,利用有限元分析软件ANSYS 作为分析工具,进行有限元静态、模态分析,并根据分析结果进行机身结构改进设计研究。本文对闭式压力机机身结构进行受力分析,采用均布载荷的方法对机身进行加载,将地脚螺栓加以6个自由度全约束,然后进行计算处理,对机身的变形大小和应力分布进行分析,从而定量确定机身的薄弱环节,并用有限元方法计算了机身的角变形。 由于各项参数都有富余,所以根据分析结果, 提出三种改进方案以减少机身材料。对三种方案分别建模,通过分析计算进行比较,得出第三种方法的各方面都符合要求,并且节省了原压力机21.4%的材料。对最优方案的机身进行模态分析,计算了机身的前六阶模态,提取了低阶固有频率,并分析了各阶模态下压力机的振型,为压力机的工作频率提供了参考。 关键词压力机,静态分析,模态分析Abstract The application of finite element analysis is significant in shortening the period of production development, increasing the quality of production, reducing the cost of manufacture and improving the enterprise competitive ability. Static and modal this present dissertation using finite element analysis software ANSYS, and some improvement designs of press frame structure have been recommended based on the results of analysis. This paper analyses the stress put on the frame of closed press, loading on the frame of closed press using uniform load, keeping the anchor bolts to all DOF and then calculating the result. The weakness of the frame is found by analyzing the distribution of stress and deformation. Angular deformation is calculated by FEM. Because all parameters meet the requirements, this paper puts forward three other methods to save material. This paper makes three modals respectively, compares the results and draws a conclusion that the third method is the best one, saving 21.4% of material of the original press. Modal analysis is conducted to the best-designed press and he first six modalities of the frame are calculated, and low order natural frequency is extracted, providing preference for the machine working frequency. Key words closed press, finite element method, static analysis, improvement designs, modal analysis 目录 摘要 I Abstract II 第一章 绪论 1 1.1 压力机机身结构分析研究概况 1 1.2 课题研究背景和来源 2 1.3 本课题的研究目的及意义 3 1.4 ANSYS软件简介 3 1.4.1 ANSYS的使用简介 3 1.4.2 ANSYS模态功能介绍 4 1.4.3 ANSYS的主要技术特点 5 1.4.4 ANSYS 有限元求解的基本步骤 5 1.5 本文主要研究内容 6 第二章 机身结构的静态分析 8 2.1

您可能关注的文档

文档评论(0)

xingkongwd + 关注
实名认证
文档贡献者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档