Effect of weld microstructure on weld properties in ATIG welding of titanium alloy.doc

Effect of weld microstructure on weld properties in ATIG welding of titanium alloy.doc

  1. 1、本文档共19页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
Effect of weld microstructure on weld properties in ATIG welding of titanium alloy

大学毕业论文英文原文及翻译 附录A Effect of weld microstructure on weld properties in A-TIG welding of titanium alloy LIU Feng-yao(刘凤尧),YANG Chun-li(杨春利),LIN San-bao (林三宝),WU Lin(吴 林),SU Sheng(苏 生) (National Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China) Abstract: Conventional TIG welding is known as its low productivity and limited weld depth in a single pass. Activating TIG welding (A-TIG) can greatly improve the penetration when compared with the conventional TIG welding. The effects of five kinds of activating fluxes with single component ( NaF , CaF2,AlF3 , NaCl or CaCl2 ) on penetration, microstructure and weld mechanical properties during the TIG welding of titanium alloy Ti-6Al-4V were studied. Compared with the conventional TIG welding, the experimental results show that the fluxes can greatly improve the penetration at the same welding specifications. This is because of the constriction of anode spots and the change of surface tension grads. Among them the effect of flux NaF is the best in the weld tensile strength, and the effect of flux CaF2 on the weld bend intension is the best. The appearance of inferior crystal grains and the structure of trident crystal grains are the main reasons that the performance of weld with fluoride is improved. These experimental results can be used as an aid for selecting suitable activating flux for titanium alloy. Key words:TIG welding; activating flux; penetration; microstructure; mechanical property CLC number: TG 444 Documet code: A 1 INTRODUCTION The activating TIG welding (A-TIG) was firstly developed by Paton Welding Institute,Ukraine, in the 1960s.[1, 2]It is not until the end of 1990s that A-TIG welding has been widely researched in Europe and US,for example,TWI and EWI.[3]The fluxes,which were developed by EWI,have been applied in the US Navy shipbuilding industry.[4]The principle of this technique is that a thin coating of activating flux is coated on

文档评论(0)

yaobanwd + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

1亿VIP精品文档

相关文档