《FactoryTalk View SE v61 1database instance install》.pdf

463910 FactoryTalk View SE v6.1: Database instance installation in existing SQL Server... Page 1 of 5 Rockwell Automation Support Center 463910 - FactoryTalk View SE v6.1: Database instance installation in existing SQL Server 2008 R2 Standard (32-bit) Access Level: TechConnect Date Created: 11/11/2011 03:48 PM Last Updated: 03/05/2013 08:08 PM Question Is it possible to install a Standard named instance into an existing SQL Server 2008 R2 for use with FactoryTalk View SE What are the Steps to install FactoryTalk View SE Database Instance into existing SQL Server 2008 R2 Standard (32-bit) Environment Factorytalk View SE Revision 6.1 SQL Server 2008 R2 Standard (32-bit) Answer Background As of version 6.1, FactoryTalk View uses a Microsoft SQL database as the HMI server’s tag database. Upon installation, FactoryTalk View will install and configure a Microsoft SQL Server 2008 R2 Express Edition (32-bit) database for this purpose. However, an existing, properly licensed version of SQL 2008 R2 Standard Edition (32-bit) can also be used, but will require a named instance to be created for use with FactoryTalk View. Note: Only 32-bit SQL Server 2008 R2 Editions (Express or Standard) are supported, the 64-bit editions are not. This document outlines the steps to install the required named instance in an existing SQL 2008 R2 Standard server, prior to the installation of FactoryTalk View. Installation Process 1. Launch the SQL Server 2008 R2 installation or launch the SQL Server Installation center (SQL Server media will likely be required.) 2. Select 'New installation or add features to an existing installation'. /app/answers/detail/a_id/463910 2013-9-16 463910 FactoryTalk