《Nomex410_TechSheet_r6》.pdfVIP

™ ® DuPont Nomex Paper Type 410 TEchNical DaTa ShEET ® DuPont™ Nomex paper Type 410 is an insulation paper which offers high inherent dielectric strength, mechanical toughness, flexibility and resilience. Nomex® paper Type 410 is the original form of Nomex® paper, and is widely used in a majority of electrical equipment applications. Available in 11 thicknesses (0.05 to 0.76 mm) (2 to 30 mil), Nomex® paper Type 410 is used in almost every known electrical sheet insulation application. Electrical properties ® The typical electrical property values for Nomex paper Type 410 are shown in Table I. The AC Rapid Rise dielectric strength data of Table I, representing voltage stress levels, withstood 10 to 20 seconds at a frequency of 60 Hz. These values differ from long-term strength potential. DuPont recommends that continuous stresses in transformers not exceed 1.6 kV/mm (40 V/mil) to help minimize the risk of partial discharges (corona). The full wave impulse dielectric strength data shown in Table I are based on multiple sheets. These values are appropriate for the applications which employ these materials in such configurations. Data based on single sheets of material are available upon request. The geometry of the system has an effect on the actual impulse strength values of the material. The dielectric strength data are typical values and not recommended for design purposes. Design values can be supplied upon request. Table i – Typical electrical properties Nominal Thickness (mil) 2 3 5 7 10 12 15 20 24 29 30 (mm) 0.05 0.08 0.13 0.18 0.25 0.30 0.38 0.51