《Sensor selection of helicopter transmission systems based on physical model and sensitivity analysis》.pdfVIP

Chinese Journal of Aeronautics, (2014),27(3): 643–654 Chinese Society of Aeronautics and Astronautics Beihang University Chinese Journal of Aeronautics cja@ Sensor selection of helicopter transmission systems based on physical model and sensitivity analysis Lyu Kehong a,*, Tan Xiaodong a,b, Liu Guanjun a, Zhao Chenxu a a Science and Technology on Integrated Logistics Support Laboratory, National University of Defense Technology, Changsha 410073, China b Department of Electronic Technology, Officer’s College of CAPF, Chengdu 610213, China Received 15 June 2013; revised 8 July 2013; accepted 22 August 2013 Available online 2 May 2014 KEYWORDS Abstract In the helicopter transmission systems, it is important to monitor and track the tooth Condition indicators; damage evolution using lots of sensors and detection methods. This paper develops a novel Health indicator; approach for sensor selection based on physical model and sensitivity analysis. Firstly, a physical Helicopter transmission model of tooth damage and mesh stiffness is built. Secondly, some effective condition indicators systems; (CIs) are presented, and the optimal CIs set is selected by comparing their test statistics according Mann–Kendall test; to Mann–Kendall test. Afterwards, the selected CIs are used to generate a health indicator (HI) Physical model; through sen slop estimator. Then, the sensors are selected according to the monotonic relevance Sensitivity an