256K SPI总线的低功耗串行SRAM.pdfVIP

23A256/23K256 256K SPI Bus Low-Power Serial SRAM Device Selection Table Part Number VCC Range Page Size Temp. Ranges Packages 23K256 2.7-3.6V 32 Byte I, E P, SN, ST 23A256 1.5-1.95V 32 Byte I P, SN, ST Features: Description: • Max. Clock 20 MHz The Microchip Technology Inc. 23X256 are 256 Kbit • Low-Power CMOS Technology: Serial SRAM devices. The memory is accessed via a - Read Current: 3 mA at 1 MHz simple Serial Peripheral Interface (SPI) compatible serial bus. The bus signals required are a clock input - Standby Current: 4 A Max. at +85°C (SCK) plus separate data in (SI) and data out (SO) • 32,768 x 8-bit Organization lines. Access to the device is controlled through a Chip • 32-Byte Page Select (CS) input. • HOLD pin Communication to the device can be paused via the • Flexible Operating modes: hold pin (HOLD). While the device is paused, - Byte read and write transitions on its inputs will be ignored, with the - Page mode (32 Byte Page) exception of Chip Select, allowing the host to service