采用PROENGINEER软件对气电立焊及进行快速虚拟设计.doc

摘 要 ,焊接效率及焊接质量均较高,主要应用的焊接，也可应用于焊接。为了提高快速响应能力，必须实现快速设计。 本论文首先介绍了气电立焊机，包括它的原理、特点、工艺特点，并介绍了其设备和用途，详细介绍了。 其次，我们三维建模。另外，为了应对繁多的齿轮传动，PRO/E参数化齿轮建模方法，完成了参数化齿轮建模。综合运用PRO/ENGINEER、AUTOCAD，我们完成了轴承三维模型的创建。利用PRO/E的零件，我们完成了大量标准件的三维建模，诸如轴承、螺栓、垫片、螺帽等等。 然后，我们在PRO/E中进行机构运动仿真，介绍一些具有代表性的装配过程，这些装配过程用到了一些实用的装配技巧。我们介绍了基本装配约束，多个螺栓的重复性装配，链条的阵列化装配，装配件中的改名操作，轴组件的装配。 最后，我们进行了机构运动设计。把各个零部件通过装配模块组装成一个完整的机构后，在PRO/E中直接启动机构运动分析模块，定义机构中的连接，设置伺服电机，分析运行机构，观察机构的整体运动轨迹和各零件之间的相对运动，进行运动仿真举例，最终能将机构运动录制成JPEG格式的动画。三维建模设计仿真Abstract Electro-gas welding is a kind of melting by the ordinary gas metal arc welding and electro-slag welding development and the formation of polar gas shielded arc welding method, welding efficiency and welding quality is high, thick plate welding of the shell plate is mainly applied to the ship, but also can be applied to the corresponding size of bridge box girder webs and large storage tank side welding of plate. In order to improve the rapid response capability, to achieve rapid virtual design. This paper firstly introduces the electro-gas welding machine, including the principle, characteristics, its process characteristics, and introduces the equipment and use, details of the ship body electric automatic vertical welding machine. Secondly, we completed the three-dimensional modeling of wire rod. In addition, in order to deal with various kinds of gear transmission, we specializes in the development of gear parametric modeling method of PRO\/E, the parametric modeling of gear. Comprehensive use of PRO\/ENGINEER software, CAXA software, AUTOCAD software, we completed the creation of three-dimensional model of bearing. With the family table function parts of PRO\/E, we completed the three-dimensional modeling of many standard parts, such as bearings, bolts, gaskets, nut etc.. Then, we performed the mechanism movement simulation in PRO\/E, introduces some representative assembly, the assembly process to use some practical assembly skills. We introduced the basic as