碳含量对高铬堆焊合金性能的影响要点.docVIP

碳含量对Fe-Cr-V-B高铬堆焊合金性能的影响 摘 要 以Fe-Cr-V-B高铬合金系为研究对象，通过改变碳的含量，得到一种抗裂性好、耐磨性优良的高铬堆焊合金，对其进行硬度测试、耐磨粒磨损试验及金相试样显微组织和性能分析。结果表明，随着碳含量的增加，碳化物的数量和体积分数都增加，形态呈现杆状——片状——网状的转变。硬度也在碳含量的一定范围内先增加，后减少。当碳含量为2.17%时，抗裂性好，耐磨性好，硬度也较高。 关键词：碳化物；堆焊；耐磨；硬度；显微组织  The effect of carbon content on the property of high-chromium surfacing alloys Fe-Cr-V-B Abstract In the subject of high-chromium alloys Fe-Cr-V-B investigated,carbon content is changed, in order to get a good crack resistance, abrasion resistance surfacing high-chromium alloy. In this experiment, the hardness is measured, grain-abrasion resistance is tested,