低压高负荷燃气透平叶片边界层分离转捩数值模拟与流动控制.pdfVIP

第 29 卷 第 26 期 中 国 电 机 工 程 学 报 Vol.29 No.26 Sep. 15, 2009 68 2009 年 9 月 15 日 Proceedings of the CSEE ©2009 Chin.Soc.for Elec.Eng. 0258-8013 (2009) 26-0068-07 TK 262 A 470 30 文章编号： 中图分类号： 文献标志码： 学科分类号： ⋅ 低压高负荷燃气透平叶片边界层 分离转捩数值模拟与流动控制 蓝吉兵，谢永慧，张荻 (西安交通大学能源与动力工程学院，陕西省 西安市 710049) Numerical Simulation and Control of Separated Transition Flows in High-lift Low-pressure Gas Turbine Cascade LAN Ji-bing, XIE Yong-hui, ZHANG Di (School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, Shaanxi Province, China) ABSTRACT: The three-dimensional Reynolds-averaged 外在PakB 叶片吸力面发展了一种展向呈矩形的被动控制结 Navier-Stokes (RANS) equations were resolved using shear- 构。研究表明，该控制结构可以使叶片吸力面边界层分离泡 stress-transport (SST) turbulence model and γ -Reθ transition 的分离点和再附点向上游移动，并使边界层提前转捩，减小 model. The typical high-lift low-pressure gas turbine PakB 了分离泡的尺度，从而降低叶片的总压损失系数。 cascade suction surface separated transition flows were 关键词：低压透平；燃气透平；高负荷；分离转捩；被动 investigated in detail. The computed results indicate that the 控制 numerical method can predict the separated transition flow 0 引言 reliably. A rectangular bar was used to passive control of the PakB cascade suction surface separation. And numerical 边界层内层流向湍流的转捩广泛存在于透平 simulation results show that the rectangular bar control device 级叶栅流动中，转捩的起始位置及转捩长度将对透 is successful to control the PakB cascade suction surface