不锈钢形变疲劳评价与寿命预测.pdfVIP

International Journal of Fatigue 31 (2009) 636–643 Contents lists available at ScienceDirect International Journal of Fatigue journal homepage: /locate/ijfatigue Thermomechanical fatigue evaluation and life prediction of 316L(N) stainless steel A. Nagesha a, M. Valsan a, R. Kannan a, K. Bhanu Sankara Rao a,*, V. Bauer b, H.-J. Christ c, Vakil Singh d a Mechanical Metallurgy Division, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu 603 102, India b Wieland-Werke Ag, 89079 Ulm, Germany c Institut für Werkstofftechnik, Universität Siegen, D-57068 Siegen, Germany d Centre of Advanced Study, Department of Metallurgical Engineering, Institute of Technology, Banaras Hindu University, Varanasi 221 005, India a r t i c l e i n f o a b s t r a c t Article history: An attempt has been made to understand the thermomechanical fatigue (TMF) behaviour of a nitrogen- Received 4 July 2007 alloyed type 316L austenitic stainless steel under different temperature domains. Smooth, hollow spec- Accepted 16 March 2008 imens were subjected to in-phase (IP) and out-of-phase (OP) thermal–mechanical cycling in air under a Available online 21 March 2008 5 1 mechanical strain control mode, at a strain rate of 6.4 10 s and a strain amplitude of ±0.4%. For the sake of comparison, total strain controlled low cycle fatigue (LCF) tests were also performed at the peak Keywords: temperatures of TMF cycling on similar specimen