2015徐凯文Cu-4.5Ti论文要点.doc

密级： 公开 NANCHANG UNIVERSITY 学 士 学 位 论 文 THESIS OF BACHELOR （2011 —2015 年） 题 目 Cu-4.5Ti合金 材料科学与工程 班 级： 材料112班 学 号： 5702111058 学生姓名： 徐凯文 指导教师： 程建奕 起讫日期： 2014.12—2015.6 目 录 摘 要 IV Abstract II 1 引言 1 1.1Cu-Ti合金的应用 1 1.2 Cu-Ti合金的强化机制研究 2 1.2.1国外Cu-Ti合金的时效强化研究 2 1.2.2国内Cu-Ti合金的时效强化研究 2 1.3 Cu-Ti合金的发展前景 3 1.4课题研究依据 4 2 实验部分 4 本实验主要研究在固溶态和冷轧态下Cu-Ti合金的硬度和电导率随时效温度和时效时间的变化过程,由此分析Cu-Ti合金固态相变的类型、程度和 4 2.1实验所用仪器设备 4 2.2实验内容及步骤 5 3 结果与讨论 5 3.1时效工艺对合金硬度的影响 5 3.2时效工艺对合金导电性能的影响 10 4 结论 11 参考文献 1 致 谢 13 Cu-4.5Ti合金 专 业： 材料科学与工程 学 号：570211058 学生姓名： 指导教师：程建奕 摘 要 。 铜合金; 调幅分解时效硬度; 导电率; in Cu-4.5 wt %Ti alloy Abstract Cu - Ti alloy is a kind of high strength and high conductivity copper alloy, using order disorder, shift and amplitude modulation decomposition of Cu - the ageing strengthening of the Ti alloy solid solution state and cold state, the author of this paper Cu - Ti alloy, measured the hardness, electrical conductivity under different ageing process changes. The performance data changes reflect the time and degree of alloy phase transformation strengthening mechanism, determine the different aging temperature, cold and hot pressure processing cases peak aging time and strength, choose a matching with good electrical conductivity of the aging process. Conductivity experimental results show that the conductivity of the from this experiment test data to see (see table 4, 5, 6), after aging, the conductivity of the cold-rolled state Cu - Ti alloy is higher than solid solution state, early aging, whether it's cold rolling state or solid solution state, conductivity are stable and increase along with the aging time; Limitation, in the middle of the long aging makes the conductiv