儿童早教机模具的设计建模及装配-本科生毕业设计论文有附录.docVIP

摘 要 传统的加工方法二维工程图为，加工出来的模具成型质量低于三维设计软件Pro/e，对模具设计建模装配，对成型过程进行有效预测实际生产可能出现的问题，产品工艺参数。通过对相关工艺参数的调整，模具设计方案。有效地缩短了产品的研发周期、模具设计周期和加工周期, 提高了模。 关键词：注塑模具；；模具设计；有限元 ABSTRACT The traditional method of mold design and manufacture is based on two-dimensional engineering drawings; it has high demand on the experience of designers and workers. Not only its cycle is long, requires testing molds repeatedly, and also with a low forming quality. The topic researched in this paper is by means of 3D design software called Pro/e, which can design, mould and assemble for kid-learning mold; it also can realize the