单层磁选机的设计 毕业设计论文.docVIP

毕业设计(论文) 学 院： 机械工程学院 专 业： 姓 名： 学 号： 指导教师： 20年 6 月 摘要 Abstract This paper is talking about the design of injection moulds; which is an important equipment of plastic forming. Injection molding is to make glutinous fusibility form required plastic product with designed shape and size in closed moulds under needed pressure by means of plastic extrusion and plasticity. The plastic product is a outer covering for a box body. According to its technical request and used request, ABS is to be closed as its material. According to its designed shape and the numbers of the product