桂林市高新区66KV变电所设计技术方案.doc

桂林市高新区66KV变电所设计 摘 要 随着现代工业化的不断发展，人们对电力供应的要求越来越高，特别是供电的稳固性、可靠性和持续性。然而电力系统的稳定性、可靠性和持续性通常取决于变电所的设计和配置。一个典型的变电所要求变电设备运行可靠、操作灵活、经济合理、扩建方便。根据各项规定，本论文设计了一个降压变电所。本次设计根据桂林市高新区各工厂电力负荷资料，对该地区66/10KV变电所进行初步设计，结合国家供电情况，解决对各部门的安全可靠，经济技术的分配电能力问题。本设计以实际负荷为依据，以变电所的最佳运行为基础，按照有关规定和规范，做出了满足该地区供电要求的66KV变电所初步设计。设计中首先对负荷进行了计算与统计，选出了所需的主变压器型号，然后根据负荷性质拟定主接线方案，设计中还包括短路计算和对各电压等级侧的电气设备进行了选择与校验，如断路器、隔离开关、电压互感器、电流互感器等。此外进行了66KV；变压器；主接线；电气设备保护 Guilin high-tech zone 66KV substation design ABSTRACT With the development of modern industrialization, increasing demand for the electricity supply, in particular the stability of electricity supply, reliability and durability. However, power system stability, reliability, and sustainability often depends on the design of substation and configuration. A typical substation substation equipment you require reliable operation, the operation is nimble, economical, convenient extension. According to the provisions, we designed a step-down transformer substation. According to this design in Guilin high-tech zone factories power load information, preliminary design of 66/10KV substation in the area, combined with the power supply situation in the country to address the departmental safety and distribution capacity of economic and technical issues. This design was based on actual and optimum operation of substation based on according to related regulations and specifications, to meet power requirements in the area of 66KV substation design. First of all in the design load is calculated with statistics, selected the required transformer type and based on load characteristics main wiring scheme, also included in the design of short circuit calculation and electric equipment for different voltage levels for selection and validation, such as circuit breakers, disconnect switches, transformers, current transformers, etc. Also for design and calculation of relay protection improves the security and reliability of the entire substation. Key words: 66KV, Transformer, Wi