挡板注射模机械CAD图纸设计.doc

摘要 模具的制造有一下几大分类，可以称为塑料模具（又分铸压模具和吹塑模具）、、铸造模具、冲压模具橡胶模具和玻璃模具等。其中，注塑模具和冲压模具用途极为广泛、技术熟练、占比重大。经过对挡板注塑工艺的分析，设计了一副一模两腔的塑料模具。里面详细的叙述了模具成型零件，其中包括型腔、模仁等设计和重要零件的工艺参数的选择与计算，浇注系统、拔模机构和冷却系统以及其它结构的设计过程。并利用emx7.0完成了塑料模具开模模拟等分析。 关键词： 注塑模具；PRO/E；CAD；挡板；  Abstract Usually die by manufacturing the product category, can be divided into plasticmold (also divided into injection mold, pressure die casting and blow mold),stamping die, die casting mould, rubber and glass mould etc.. Among them,especially injection molds and stamping mold use, mature technology, occupies a large proportion of the. Through the correct analysis of the baffle in molding process, the mold two cavity plastic mold design. Details including cavity, molddesign and molding parts, process parameter selection and calculation of important parts, pouring system, cooling system and the design process of other structures, the selection principle of mould. And using emx7.0 to complete heanalysis of plastic mold tooling simulation. Key words： injeetion mould；Pro／E；CAD；Bezel； 1 绪论..............................................................1 2 塑件成型特性.....................................................2 2.1 注塑件实体....................................................2 2.2 材料的成型特性................................................3 2.3 ABS材料的成型工艺参数.........................................3 3 设计方案及参数的确定.............................................4 3.1 注塑机的确定..................................................4 3.2 浇注系统设计..................................................5 3.2.1 主浇道设计................................................6 3.2.2 冷料穴的设计..............................................7 3.2.3 分流道的设计..............................................8 3.2.4 浇口的设计................................................8 3.3 分型面的设计..................................................9 3.4 排气系统的设计 ..............................................11 3.5 冷却系统的设计.......................