低频驻波测试仪器技术方案.docVIP

低频驻波测试仪器 Brand New !HF Band Two Way Radio Digital Power SWR Meter RED DOT 1.6 mhz~60 mhz?2016A 199W Items Detail: The latest model 2016A HF VSWR Power Meter adopts sampling techniques, the A / D converter effective resolution arrives to 12bits.It remains easy operation and many other practical features.The RF connector is the most commonly used in HF band called M-KF (also known as SO239 UHF, SL16, etc.)Technical Specification:*Maximum Power: 199 W*VSWR:1.00~19.9*Frequency Range:HF 1.6MHZ~60MHZ*LCD Screen:3 1/2 LCD*RF connector:UHF–KF (SL16,SO239,M)*Insert Loss: 0.2db*Reflection Loss:30db*Directionalness 30db*Working TemperatureL 0℃~70℃*Power supply: AAA*3*Power assumption: 3mA(Backlight OFF)10mA(Backlight ON)*Size: 66*68*37（mm）（Excluding protrusions）*Net Weight400gThis is mini Digital HF Power SWR Meter. 100% new, factory packed and never been used.Specifications:MAX.POWER 200 WV.S.W.R 1.00~19.9FREQUENCY RANGE HF (1.6mhz~60mhz)COVER:110mhzONSERTION LOSS 0.1 dBTEMPERATURE 0℃~70℃BATTERY?3 x AAA Type Battery or Rechargeable 2mA(battery not included in this sale)SZIE 100*80*50 (mm)INTERFACE m (SL16)WEIGHT 400g (without battery) Instructions:Battery installation: Remove 4 black round screws on the corner of back cover and open it. Install 3 AAA batteries. BE CAUTIOUS to the polarities. Put the cover on and fasten the screws. IMPROPER INSTALLATION OF BACK COVER WILL CAUSE ERROR ON U-BAND MEASUREMENT!Connect the Output of your transceiver to TX and Antenna or Load to ANT. NOTE: UV-Band meter utilize N type connectors; andSL16 connectors (normally named M connecter) for HF-Band. Proper adaptor/cable is required if your device has different type of connectors.Press the red button to power on. After 2 seconds of LCD self test, its ready for normal measurement.UV-Band meter will display in sequence:+ XXX P (pass through power),- XXX P (feed back power), XXX Γ (SWR value), 2 seconds display for each mode. Press the red butto