GE3.6MW系列风电机组.docVIP

3.6 MW系列风电机组 Proven Technology with Offshore Expertise A larger version of our proven 1.5 MW design, the 3.6 MW machine was specifically designed for high-speed wind sites. With a rotor diameter of 104 meters and a swept area of 8,495 square meters, the new wind turbine is ideal for offshore markets worldwide. Active yaw and pitch regulated with power/torque control capability and a double-fed asynchronous generator, it uses a distributed drive train design where all nacelle components are joined on a common structure, providing exceptional durability. The generator and gearbox are supported by elastomeric elements to minimize noise emissions. Technical Drawing 一、3.6 MW风电机组技术规范 Operating Data 3.6 Rated capacity 3,600 kW Cut-in wind speed 3.5 m/s Cut-out wind speed 27 m/s Rated wind speed 14 m/s Rotor 3.6 Number of blades 3 Rotor diameter 104 m Swept area 8,495 m2 Rotor speed (variable) 8.5 - 15.3 rpm Tower 3.6 Hub heights Site-dependent Power control Active blade pitch control Design Data 3.6 IEC 61400-1 ed2 Type class 1B Gearbox ·Three step planetary spur gear system Generator ·Doubly-fed asynchronous generator Converter ·Pulse-width modulated IGBT-frequency converter Braking System (fail-safe) ·Electromechanical pitch control for each blade (three self-contained systems) ·Hydraulic parking brake Yaw System ·Electromechanical driven with wind direction sensor and automatic cable unwind Control System ·Programmable logic controller (PLC) ·Remote control and monitoring system Offshore Container ·Protecting converter, low and medium voltage switchgear, transformer and control system Noise Reduction ·Impact noise insulation of the gearbox and generator ·Sound reduced gearbox ·Noise reduced nacelle ·Rotor blades with minimized noise level ·Onshore version: Noise-reduced operation (optional) Lightning Protection System ·Lightning receptors installed along blades ·Surge protection in electrical components Tower Design ·Hybrid tower made of prestressed concrete and tubu