地坪材料目录简介.docVIP

Peiniger Chemical GP Product Catalog GP10 is two components, low-viscosity, 100% solids clear epoxy primer with High Chemical Resistance and High Bond Strength. The epoxy may be applied as a primer for most coating systems, like Epoxies, MMA, Polyurethanes, Vinyl Esters, Polyesters, etc. GP11 is two components, lower cost, 100% solids dark epoxy primer with High Chemical Resistance and High Bond Strength. The epoxy may be applied as a primer for most High End Industrial coatings, like Epoxies, MMA, Polyurethanes, Vinyl Esters, Polyesters, etc. GP2000 is two components, 100% solids Self-Leveling, Low-Viscosity colored epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative coating with high gloss finish for new or old epoxy floors. It can be mixed with appropriate silica sand to create a thicker flooring system in high abrasion situations. GP2007 is?two components, 100% solids multipurpose clear epoxy binder for Mortar and Fiberglass Systems, but not for self-leveling coating. This all purpose epoxy resin is characterized as an excellent general purpose material with good mechanical strength, odorless and can therefore be used in occupied areas. Protect against mild corrosion. GP2008 is?two components, 100% solids Self-Leveling colored epoxy coating used for high foot and light forklift traffic areas where abrasion resistance is required; for protection against mild corrosion; and as a decorative coating for floors. GP2009 is two components, 100% solids, very low viscosity colored epoxy coating specifically formulated and manufactured to produce a easy apply coating used for high foot and light forklift traffic areas where abrasion resistance is required. It can be used as a stand alone coating with high gloss finish for new or old epoxy floors. It can be mixed or broadcast with appropriate silica sand to create an anti-skid flooring system. Peiniger Chemica