240x128液晶T6963控制器驱动程序.docVIP

240x128液晶T6963控制器驱动程序（C51） /*[文件名] t6963.c[功能] 240X128液晶[版本] 3.0[作者] 鞠春阳[最后修改时间] 2003年5月12日[版权所有] [资料] 请到下载===========================================================================================*/ #include absacc.h#include math.h #include ASCII816.h //标准ASCII库#include HZTable.h? //汉字点阵库(自做)#include menu.h???? //菜单库(自做) #define ComPort 0xB101#define DataPort 0xB000#define GraphAddr 0x0000 //head of graph //以8*8字符计算,显示屏横向、纵向可以显示的字符个数//以240*128为例:#define LineChar 30 //一行16个字符(8*8)#define ColumnChar 16 //总共16列 //指令,数据 读写状态检查#define RWCheck() { unsigned char sta; do{ sta=XBYTE[ComPort] 0x03; } while(sta!=0x03); }//数据自动读 状态检查#define AutoRCheck() { unsigned char sta; do{ sta=XBYTE[ComPort] 0x04; } while(sta!=0x04); }//数据自动写 状态检查#define AutoWCheck() { unsigned char sta; do{ sta=XBYTE[ComPort] 0x08; } while(sta!=0x08); } /*输入/出函数,与T6963通讯*//**/ // 向数据口发Data#define OutPortData(dat ) { RWCheck(); XBYTE[DataPort]=dat; } //写有 1 个参数命令#define OutPortCom1(command) { RWCheck(); XBYTE[ComPort]= command; } //写有 2 个参数命令#define OutPortCom2(dat, command) { OutPortData(dat); OutPortCom1(command); } //写有 3 个参数命令#define OutPortCom3(data1, data2, command) { OutPortData(data1); OutPortData(data2); OutPortCom1(command);} unsigned char InPortData() { RWCheck(); return(XBYTE[DataPort]); } /**///显示8*16字符//lin:行(0-7), column: 列(0-15)//ch:字符代码(标准ASCII码)void ShowChar(unsigned char lin,unsigned char column,unsigned char ch){unsigned char i;unsigned char dat;unsigned int StartAddr; StartAddr=lin*LineChar +column; //定位起始行 for(i=0;i16;i++){dat=ASCII816[ ch-0x20 ][i];OutPortCom3( (unsigned char)(StartAddr), (unsigned char)(StartAddr8), 0x24); //set addressOutPortCom2( dat, 0xc4); StartAddr=StartAddr + LineChar;}} /**///显示一个汉字(16*16点阵)//lin:行(0-7), column: 列(0-7)//hzcode: 汉字代码(自定义的)void ShowHZ(unsigned char lin,unsigned char column,unsigned int hzcode){unsigned char i;unsigned int StartAddr; StartAddr=lin*LineChar + column; //定位起始行 for(i=0;i16;i+