阀门单词.docVIP

阀体?body? 阀体?valve?body 阀盖?bonnet 阀盖衬套?bonnet?bush 阀盖垫片?bonnet?gasket 阀杆 Stem 阀杆螺母 Yoke?bushing?Yoke?nut 阀杆环?stem?ring 阀瓣 Disc 阀座?Seat?ring 阀座?valve?carrier 阀座?valve?seat(body?seat) 阀座;阀盘?valve?seat 电磁阀阀座 solenoid valve seat 阀座环?seat?ring 阀座密封嵌条?sealing?strip?for?valve?seat 阀箱?valve?box 法兰?flange 挡板?damper 填料?Packing 填料垫?Packing?seat Gland:填料压盖Stuffing box:填料箱 阀?Pilot?valve 导向套?Valve?guide?disc?guide 密封件 Sealing 密封圈Ball seat 启、阀件密封面 Blowdown Sealing Face 水，温度，气Water，oil，steam 行程 Stroke 楔式Wedge焊接　WeldingAxis 轴套Guide Ball 球、球芯 ut 螺母 Screw 螺栓 Spring 弹簧 Wedge Disc 闸板 Yoke:支架Back seat :上密封Pressure seat:内压自封Dimension of valve stem head:阀杆头部尺寸Dimmension of valve stem end :阀杆端部尺寸Dimension of connecting channel :连接槽尺寸  气动元件 pneumatic components脚踏阀 foot operated valve气动气管 pneumatic gas tube气动手指 pneumatic finger气源处理器 air treatment执行元件 execute component控制元件 control component辅助元件 auxiliary component气缸 cylinders标准气缸 standard cylinders薄型气缸 compact cylinder气动接头 tube connectorPU管 PU tube Specifeca tion speeification主要性能参数 Nominal pressure 公称压力Nominal diameter公称通径Working pressure 工作压力Working temperature 工作温度 Max. Discharging Capacity 最大排水量Max. Operating Temperature 最高工作温度Max. Allowable Temperature 最高允许温度Max. Allowable Pressure 最高允许压力Suitable medium 适用介质Suitable temperature 适用温度Shell test 壳体试验Seal test pressure 壳体试验压力Seal test 密封试验Seal test pressure 密封试验压力Type of construction 结构形式Face-to-face dimension End-to-end dimension Face-to-centre dimension结构长度Back seal test上密封试验Leckage 渗漏量Percent of contact area??吻合度Type 类型Type Model 型号Prime out-form dimensions 主要外形尺寸Conncetion dimension??连接尺寸Set pressure 整定压力Overpressure of a safety valve 超过压力Re-seating pressure of a safety valve 回座压力Blowdown of a safety valve 启闭压差Cold differential test pressure? ???冷态试验差压力Relieving pressure排放压力Brilt-up back pressure??排放背压力Superimposed back pressure??附加背压力Lift开启高度Commencement of li