Service Overview_Pumping Station-1.01.docVIP

Service Overview 维修保养 Pumping Station GV600 / EH4200 GV600 / EH4200真空泵 The pumping station must be installed by a specially skilled and briefed technician. The wiring diagrams are to be found in the main operating manual, chapter 14, fig. NRB 46400. GV600 The pump is operated with the synthetic gear oil type Mobil SHC 629 Antiwear. Filling Quantity Gear : 1.4 l min. – 1.9 l max. Filling Quantity High Vacuum Bearing : 1.1 l min. – 1.2 l max. Work Step Interval Chapter Check gear oil level and replenish as necessary. weekly 5.3 Check oil level of high vacuum-sided bearings replenish as necessary. weekly 5.4 Check gas ballast system. monthly 5.5 Check pipes and connections. quarterly 5.6 Check interstage pressure relief valve and change hinge, hood and O-ring as necessary. every 18 months 5.7 Change gear oil1 and clean oil level gage glass. every 18 months 5.8 Change oil of high vacuum-sided bearing and clean oil level gage class2. every 18 months 5.9 Exchange high vacuum aeration filter. every 18 months 5.10 Clean cooling jacket3. every 18 months 5.11 Exchange interstage pressure relief valve. as necessary 5.12 Exchange pumps motor. as necessary 5.13 Change coupling set. annually 5.14 Overhaul pump. every 6 years 5.15 EH4200 The pump is operated with the oil type Ultragrade 20. Filling Quantity Shaft Seal Ring Reservoir : 0.15 l Filling Quantity Gear : 3.50 l Filling Quantity Hydro-Kinetic Coupling : 6.50 l Work Step Interval Chapter Check oil level. daily / weekly 5.3 Check pump connection. monthly 5.4 Change oil. every 12 months 5.5 Lubricate back bearing. every 12 months 5.6 Overhaul pump. every 6 years 5.7 Use overhaul kit for pressure relief valves. Use routine service kit. The service interval is based on the operation with a casing temperature of 122 °F / 50 °C. In case the pump is operated at higher temperatures, we recommend the use of the SHC 630 oil and the potential reduction of the oil change interval. For further a