炼油Design知识.docVIP

Design, Purchase and Installation of Mazut to Bitumen processing line 重油加工沥青生产线的设计、采购、安装 1) Design of the line reprocessing of fuel oil (mazut) to produce bitumen 2) Production facilities and components of the processing line of fuel oil to produce bitumen(purchase of equipment for the production line) 3) Installation of plant and cpls for those lines of processing oil to produce bitumenProcessing capacity of 500 tons per day. 320 days a year.Specification on Fuel Oil: ? ?CST 180 CST 240 Specific gravity @ 15.6°C (0.950) (0.980) Flash point (P.M.) °C (min) 60 65 Viscosity Cst @ 50°C (max) 180 240 Pour point °C (max) +21 +27 Sulphur content % Wt. (max) 4 4.5 Carbon Residue (RAMS) Wt. % max 7.5 9 Water Sediments %V (max) 0.5 0.5 Calorific Value K.cal/kg (gross) 10500 10300 Specification on required asphalt: Paving asphalt Grade 40-50 60-70 85-100 Specific gravity @ 15.6°C 1.01 1.04 1.03 Flash point (P.M.) °C (min) 240 230 230 Penetration @ 25°C (100gm, 5sec, 0.1mm) 40-50 60-70 85-100 Softening Point (RB) °C 49-58 47-55 44-52 Ductility @ 25°C 100 100 100 Solubility in CC14 % W (min) 99.0 99.0 99.0 Loss on heating % W max (5HRS, 163°C 0.5 0.5 0.5 Penetration of residue after loss on heating ? ? ? % of the original Value (min) 75 75 70  We are considering constructing a Vacuum Refinery. The Facilty is to be Designed to process The Reduced Crude Oil (RCR) From Kirkuk Crude Oil at Total capacity Of 6000 Bpds The Proposed Unit Will Process This Fced Stock to obtain Light Vacuum Gas Oill (LVGO) , Heavy Vacuum Gas Oill (HVGO) , and Vacuum Residue VR .The composition Of The Feed Stock Roughly is 25 % LVGO , 25 % HVGO , And 50 % V/V VR. This VR is to be Fearther Processed for Asphlt Road, The Unit Will have Air Blowing Tower To Control Gas emission in The refinery and to reduce feedstock Cracking, it is demanded to have efficient Vacuum System Vacuum Pressure in The Tower is required to be 80 mm Hg and to and the Furnace Out let Operation Temp. Not to exceed