LGT螺旋铰刀产过程.docVIP

LGT螺旋输送机 山东祺龙电子有限公司LGT螺旋输送机分为单驱动和双驱动两种形式，单驱动螺旋机最大长度可达40m(特大型30m)，双驱动螺旋机采用中间断开轴结构，最大长度可达80m(特大型60m)，螺旋机长度每 0.5m 一档，可根据需要选定，螺旋机头部轴承、尾部轴承置于壳体外部减少了灰尘对轴承室的侵入提高了螺旋机关键件的使用寿命。中间吊轴承采用滚动、滑动可互换的两种结构，并设防尘密封装置，密封件用尼龙用塑料，因而其密封性好，耐磨性强，阻力小，寿命长。螺旋机广泛使用在各种工业部门,如建材、冶金、化工、电力、煤炭、机械、轻 工、粮食及食品行业,适用于水平或小于20°倾角,输送粉状、颗粒状、小块状物料,如水泥、煤粉、粮食、化肥、灰渣、沙子、焦炭等。 螺旋输送机对输送物料的要求，粉状、粒状和小块状物料，如：水泥、煤粉、粮食、化肥、灰渣、砂子等，物料温度不得超过200℃，螺旋机不宜输送易变质的、粘性大的、易结块的物料。因为这些物料在输送时会粘结在一螺旋上，并随之旋转而不向前移动，或者在吊轴承处形成物料的积塞而使螺旋机不能正常工作。 螺旋机的工作环境应在-20℃~50℃之间，允许稍微倾斜使用，最大倾角不得超过20℃。 1. 承载能力大、安全可靠。2. 适应性强、安装维修方便、寿命长。3. 整机体积小、转速高、确保快速均匀输送。4. 密封性好、外壳采用无缝钢管制作，端部采用法兰互相连接成一体，刚性好。 花键轴套：用于连接筒体 铰刀轴承盒：用于固定轴承 减速机： 电机 头节、若干标准中间节、造配中间节、尾节 Subsequently, the Anhui Army military Special Branch, in Shanghai's Central Intelligence Organization and the Communist party organization in Western Zhejiang Province, sent party backbone, respectively, went to Wu Jiangyan opened the Tomb, Tomb of heroic people, under the leadership of the Communist Party, fear no sacrifice and persevering, goal of the anti-Japanese revolutionary struggle. (A) stationed in Taoyuan area (Tomb of) 1, the new army of the Communist Party of China underground organization in September 1938, the CPC Zhuang Shaozhen (Zhuang Zhen, Nanxun people) by the Deputy Director of the political Department of the army on Deng Zihui's dispatch, operating from Jing County, Anhui Province, the Lake reached the Tomb, its tasks are: looking for reliable object, introduce them to the new, to expand the new team. Zhuang Shaozhen KMT-CPC cooperation as an opportunity, after classmates Yao Bi (Nanxun people, Ren Zhuxi force staff Director), introduced into the Kuomintang government political team, and as a political leader. He used this opportunity to invite progressive youth Hong Haiquan form a political team, at this point, the County Government has just been established, local school, unemployed youth are more quickly absorbed sheng, zhenze, Miaogan