组宣部2010下半年工作总结(更改).docVIP

2010年下半年工作总结 组织宣传部 2010年下半年，全院上下全力以赴完成了国家示范院校建设验收和新一轮人才培养评估工作。在院党委的正确领导下，组宣部按照学院国家示范院校建设验收的总体部署，紧紧围绕“夯内涵、建品牌、上层次”的战略发展理念，团结一心、攻坚克难，不断提升工作水平和提高工作效率，为学院的改革与发展做出了积极的努力。 一、扎实推进、落实到位，不断将创先争优活动引向纵深 2010年，我院开展了“创先争优”活动，经过科学筹划、谋篇布局，创先争优活动取得了良好开端。本学期，组宣部根据中共河北省委创先争优活动领导小组办公室有关通知精神，结合我院实际情况，按照“经常有动作、阶段有中心、节点有高潮”的活动思路，就深入推进创先争优活动做出了安排部署。先后下发了《征文启事关于国庆节后开展创先争优重点活动安排的通知 center pin checks and anchoring the inner cylinder. According to While coupling alignment should keep oil out of cavity and locate the rotor axis neck raised are within the prescribed limits, there should be no gaps, Horn, Horn and Horn 0.05mm feeler gauges fit into. Center coupling, condenser water filling and water-filled according to factory requirement. For coupling three supported rotor Center, the mouth under the coupling between the value should be as stipulated in the manufacturer, usually 0.15~0.25mm. In the case of coupling connection, if possible, lifting only one bearing end of the support bearing of the rotor, remove the bearing, fitted with special tiles and special lifting tools, disc rotors, check the journal flutter tile, should generally be less than 0.10MM. When the couplings and rotor comes when there is a conflict, the coupling Centre shall prevail. 6.4.5.2.2 shaft looking for: ... 6.4.5.3. Provisional bolt confirmed the positioning of the rotor size, as well as the coupling between the adjustment shim thickness accuracy, drawings to meet the technical requirements. Plane, cylindrical and clean the coupling bolt holes should be clean and without burrs, scrap iron and grease-free, relative position of the coupling according to the drawing requirements are. Coupling top screws, round distance apart, indicators to monitor movement of the aircraft, its value is allowed to pass the value axis moving, mounted adjustment pads, note pads installation direction guide pin coupling with process end closed. The back wheels slowly tightened, when 2mm or so, with standard white bars where two