CISCO路由换机配置.CH01.04.路由器的基本配置-3.管理IOS.docVIP

  • 8
  • 0
  • 约6.27千字
  • 约 5页
  • 2016-10-12 发布于贵州
  • 举报

CISCO路由换机配置.CH01.04.路由器的基本配置-3.管理IOS.doc

CISCO路由换机配置.CH01.04.路由器的基本配置-3.管理IOS

开一个TFTP服务器,一般都是绿色版的,打开就行 升级ios 从tftp服务器拷贝ios文件到路由器 备份路由器配置到tftp 恢复配置信息到路由器 appearance of the weld appearance quality technical requirements of the project must not have a molten metal stream does not melt the base metal to weld, weld seam and heat-affected zone surface must not have cracks, pores, defects such as crater and ash, surface smoothing, weld and base metal should be evenly smooth transition. Width 2-3 mm from the edge of weld Groove. Surface reinforcement should be less than or equal to 1 + 0.2 times the slope edge width, an

文档评论(0)

1亿VIP精品文档

相关文档