浪潮服务器RAD配置方法.docVIP

Raid配置与管理服务器开机自检到浪潮logo画面后，下一步就会进入Raid卡自检过程，此时显示器上会出现Ctrl -H提示，如下图： 按下Ctrl -H组合键后，自检完成就会进入Raid卡配置界面，如下图。在这里可以看到Raid卡的型号和Firmware固件版本，点击【Start】按钮进入Raid卡主页。 Raid卡首页叫作WebBIOS，如下图。左侧是功能菜单，右侧可以看到所有物理磁盘，本例安装了4块500G硬盘，后面所有的配置都可以在这里完成！ 在WebBIOS主页点击【Configuration Wizard】，打开配置向导 选择【Add Configuration】，点击【Next】下一步 选择【Manual Configuration】，点击【Next】下一步 左侧方框内可以看到所有未使用的硬盘。因为要做Raid1，我们选择前两块，然后点击下方的【Add to Array】将其加入到右侧方框内。 点击【Accept DG】，创建磁盘组 点击【Next】下一步 点击【Add to SPAN】，将刚才创建好的磁盘组加入到右侧方框内 点击【Next】下一步 阵列参数配置：第一个参数“Raid Level”选择Raid1，其余保持默认 最后一个参数“Select Size”输入阵列容量大小，最大值可参考右侧绿字提示（其中R0代表做Raid0最大容量，R1代表做Raid1最大容量），完成后点击【Accept】 弹出的任何提示均选择【yes】 回到配置页面，点击【Next】下一步 点击【Accept】配置完成！ 提示保存，选择【yes】 （依Raid卡型号不同，有些可能没有此功能，如没有请跳过此步）提示SSD缓存，选择【Cancel】 提示初始化，选择【yes】 正在初始化，能看到百分比进度条（速度较快，可能一闪而过） 初始化完成！点击【Home】返回首页 阵列配置完成！ Raid1状态显示“Optimal”表示正常，Drives显示两块硬盘绿色Online正常，如果还有其它未使用的硬盘，会在unconfigured Drives下面蓝色显示。 real, in each pen business lending Qian not for by pen query, led to mortgage failure of. (Vi) not in accordance with the relevant provisions of the Bank operation, failed to identify false documents, certificates, authorizations, warrants, etc. (VII) in the credit risk management system to provide false information, is not required by the guest rating credit management objective, impartial ratings of credit, resulting in credit decision-making errors. (H) the investigation report conclusions of false record, misleading statement or material omission, resulting in credit decision-making errors. (I) the orders, directives, orders, suggest that others not involved in the investigation business, issued by the investigators. (10) without the approval of authorities, after the first credit investigation, credit first and then record, counter-current process operations such as operation prior to approval. (11) article does not meet the risk management Department, Marketing Management Department to carry out supervision and inspection