三维数据模型与3D打印驱动的研究与实现-林翊汇总.docVIP

广州大学华软软件学院 本科毕业论文 论文题目 三维数据模型与 3D打印驱动的研究与实现 专 业 电子信息工程（嵌入式软件开发） 班 级 10嵌入式软件开发1 姓 名 林翊 学 号 1040907120 指导教师 张芒、叶小艳 广州大学华软软件学院电子系 2014年 4 月 摘要 本设计中3D打印驱动采用PC—单片机相互通信，主要过程主要可以分为数据处理和物理实现两个步骤三轴电机，并且在平面 该设计选用 μVision4软件， Designer ，是一款软件用与辅助设计印制电路板（）。STL模型；分层；算法；模块化；ABSTRACT The design 3D-printer driver using PC - single chip micorcomputer to communicate with each other, the main process can be divided into two data processing and physical implementation steps , including the completion of data processing that is three-dimensional model of discrete functions, and physical implementation is based on discrete layers slice data to complete the manufacturing entity. This process is mainly used Solidworks in the PC to establish a three-dimensional model of the STL model stratified, hierarchical data is then processed using PC procedures for processing and then sent to the next bit machine ( SCM ) , the next crew to the X -axis Y , respectively, control signal axis and Z -axis stepper motor output required to execute the command , control stepper motor operation . Each module has an algorithm for processing the data, having the characteristics of modularity, communication integrity. Guiding idea is to use a one-dimensional algorithm , XYZ -axis motor control , and the use of algorithms in planar zigzag X -axis and Y -axis to accelerate the realization of two-axis work efficiency . The design selected a software called Keil μVision4, is a C-language software development system. Circuit part with Altium Designer, is to develop on the basis of computer software to assist to design printed circuit board (PCB). KEY WORDS 3D-printer；STL model；Layered；Algorithm；Modular  目 录 1. 前 言 1 1.1. 3D打印技术的简介 1 1.1.1. 3D打印技术原理 1 1.1.2. 3D打印过程 2 1.1.3. 选题背景与国内外研究概况 3 1.1.4. 发展趋势及优势 3 1.2. 设计要求与主要解决的问题 4 1.2.1. 设计要求 4 1.